【www.shanpow.com--简历模板】
雅思流程图模板【一】:雅思流程图八大范文
雅思流程图八大范文
1.《蚕丝制作》
Sample：
As is displayed in the first diagram, the life cycle of the silkworm can be categorized into 4 main stages. First, the life of the silkworm starts from eggs propagated by the moth, and it takes 10 days for each egg to become a
silkworm larva that feeds on mulberry leaves. Silkworm larva continues to grow in 4 to 6 weeks, then wrapping itself with silk thread to construct a cocoon in the next 3 to 8 weeks. A moth can be produced from the cocoon in 16 days. The life cycle begins again from then on.
Focusing on the second diagram, it illustrates the 5 main steps of the procedure of producing silk cloth. Well generated cocoons will be selected
firstly. Before the silk thread can be unwound, cocoons have to be boiled in hot water. One cocoon can produce approximately 300 to 900 metres of silk thread. The unwound thread will be dyed afterwards to be weaved into silk cloth.
Overall, the two diagrams reveal the stage of producing cocoons in the life cycle of the silkworm can be used to make silk cloth through 5 simple steps. Cambridge IELTS 6 Version:
The first diagram shows that there are four main stages in the life of the silk worm.
First of all, eggs are produced by the moth and it takes ten days for each egg to become a silkworm larva that feeds on mulberry leaves. This stage lasts for up to six weeks until the larva produces a cocoon of silk thread around itself. After a period of about three weeks, the adult moths eventually emerge from these cocoons and the life cycle begins again.
The cocoons are the raw material used for the production of silk cloth. Once selected, they are boiled in water and the threads can be separated in the unwinding stage. Each thread is between 300 and 900 metres long, which
means they can be twisted together, dyed and then used to produce cloth in the weaving stage.
Overall, the diagrams show that the cocoon stage of the silkworm can be used to produce silk cloth through a very simple process.
2. 《户外取水》
The chart describes how water is obtained outdoors.
According to the figure, the first step of obtaining water outdoors is to find a hole with green plants on its bottom. Next, remove the green plants in the middle and put a container there. Then, cover the hole with a plastic sheet and place two stones on both ends of it to secure its position. A third stone is laid on the middle of the plastic sheet so that the middle part is also the lowest part. When the sun shines on the green plants in the hole, water evaporates from these plants. The vapor rises up and then cools down to form water drops on the plastic sheet. When there is more and more water, it flows along the sheet to accumulate on the lowest part. Finally, water falls down into the container directly under the middle stone.
Thus, water is collected successfully through evaporation from green plants.
3.《房屋不同季节的构造》
As is displayed in the flow chart, the principles of insulation in cool and warm climate respectively differ to a large extent.
As to the situation of cool climate, we adopt the high-angled roof in order to be nearly parallel with the direction of the sun so that the direct exposition to the heat of sun is lessened as much as we can. By this, the temperature of the material won’t fluctuate within a large range. Meanwhile, thermal building material could enhance the heat storage insulation, preventing outflow, thus reduction of heat.
Adversely, in warm climate, reflective building material is indispensable with overhands for shade. The direction of the roof is almost vertical to the direction of the sun to lead to external insulation reflection. By this, ventilation would result in the removal of heat storage rather than reduction.
Through the different working principles of ventilation, we are fascinated by the masterpieces of modern science and technology.
4．《超市建造地点选择》
As is unfolded in the map, Place M and N have their unique pros and cons as to the place for building the supermarket.
First of all, Place N is located in the urban area of the G town, which may have more population and business. This advantage is incomparable with Place M. What’s more, Main road runs across the center area with
convenience in traffic and logistics for the market afterwards. However, the place is equally far away from the neighborhood and the suburb area and cannot attract the residents in the outskirts.
As a double-edged sword, Place M is more specifically customer-oriented. In spite of its comparably remote location with Place N, it would attract more customers in the outskirts, for they are reluctant to make a long trip for
shopping. On the other hand, the train line nearby will also bring convenience in traffic to the urban-dwellers. Situated to the north-west of Place N, Place M is near the A and B Town with total population of 23 million, far outnumbering the overall population of D and E town, with 12 million.
What’s worthy of being mentioned is that fierce competition in Place N and probable monopoly in Place M should also be taken into account when building the supermarket.
5.《玻璃的再生》
As is displayed in the flow chart, the recycling process of glass is really a complex one.
The overall process can be categorized into 3 stages. First, glass products in various forms are gathered in the Collection point, so that they are easily transported by special trucks or vans to the Cleaning plant, where they get
sterilization by high-pressured water. There are three different channels in the Recycling plant, namely Brown, Green and Clear, which represent the colors of glass. After recycled in the furnace, glass products are melted into recycled liquid glass. Mixed with new liquid glass, the compound is finally moulded into solid glass, which, afterwards, will be sent to various customer supermarkets for selling. Thus, the glass will go to the customers for different purposes.
Through a brief introduction of the circle of glass recycling, we come to realize that recycling plays a vital role in environmental protection and
ecological preservation.
6．《化肥的制作》
As is shown in the flow chart, the process of recycling organic waste to produce compost is really a complex one.
The whole process can be categorized into five stages. First of all,
prepare a plastic container which has four holes for ventilating the air. There is a rule when putting waste into the container, food at the bottom within 15 centimeters high, grass at the middle and newspaper at the top within 15 centimeters high altogether, in order to make a optimum environment for
different bacteria reproducing. In the following stage, we can witness nitrogen and water being put into the container. What's worth mentioning is that water is only added in a hot weather. Next, heat the waste and let the bacteria
reproduce fastly, with which the organic waste can be decomposed and became garden fertiliser after 6 months. Subsequently, we can carry the compost out and move it to the garden, thus a new recycling can begin. In conclusion, using this way to turn the organic waste into garden
fertiliser is environmentally friendly. By enlarging the number or volume of the container, we can dispose more waste at the same time.
7．《美国黄石公园植被恢复》（暂无范文）
8．《咖啡的制作》
The diagram shows the stages in the process of making chocolate.www.shanpow.com_雅思流程图模板。
Chocolate comes from the cacao tree, which is grown in parts of South America, Africa and Indonesia. The tree produces large red pods which
contain white cocoa beans. Firstly, when the pods are ripe, they are harvested, the beans are removed and they are fermented for several days in large wooden boxes. During the fermenting process, the beans turn brown.
Next, the brown beans are spread in the sun to dry. They are then put in large sacks and transported by train or lorry. After this, the beans are taken to a chocolate factory where they are roasted in an oven at temperatures of between 250 and 350 degree Celsius.
After being roasted, the beans are crushed and the outer shell is removed. This part is not needed for making chocolate. Finally, the inner part of the bean is pressed and liquid chocolate is produced.
9. 《砖块的制作》
The process by which bricks are manufactured for the building industry can be outlined in seven consecutive steps. First the raw material, clay, whichwww.shanpow.com_雅思流程图模板。
was just below the surface of soil in certain clay-rich areas has to be dug up by a digger.
Then the lumps of clay are placed on a metal grid in order to break up the big chunks of clay into much smaller areas, which fall through the metal grid onto a roller, whose motion further segregates the bits of clay. Sand and water are added to make a homogenous mixture, which is then either formed in moulds or cut into brick-shaped pieces by means of a wire cutter.
Those fresh bricks are then kept in a drying oven for at least 24 and a maximum of 48 hours, several dozens if not hundreds of bricks at a time. The dried bricks are then transferred to a so-called kiln, another type of high temperature oven. First they are kept at a moderate temperature of 200 ℃
-1300 ℃ . This process is followed by cooling down the finished bricks for 48 to 72 hours in a cooling chamber.
Once the bricks have cooled down and have become hard, they get packaged and delivered to their final destination, be it a building site or storage.
雅思流程图模板【二】:雅思写作流程图的模板以及范文
雅思写作流程图的模板以及范文
雅思流程图范文之《砖块的制作》
The process by which bricks are manufactured for the building industry can be outlined in seven consecutive steps. First the raw material, clay, which was just below the surface of soil in certain clay-rich areas has to be dug up by a digger.
Then the lumps of clay are placed on a metal grid in order to break up the big chunks of clay into much smaller areas, which fall through the metal grid onto a roller, whose motion further segregates the bits of clay. Sand and water are added to make a homogenous mixture, which is then either formed in moulds or cut into brick-shaped pieces by means of a wire cutter.
Those fresh bricks are then kept in a drying oven for at least 24 and a maximum of 48 hours, several dozens if not hundreds of bricks at a time. The dried bricks are then transferred to a so-called kiln, another type of high temperature oven. First they are kept at a moderate temperature of 200 ℃ -1300 ℃ . This process is followed by cooling down the finished bricks for 48 to 72 hours in a cooling chamber.
雅思流程图范文之《超市建造地点选择》
As is unfolded in the map, Place M and N have their unique pros and cons as to the place for building the supermarket.
First of all, Place N is located in the urban area of the G town, which may have more population and business. This advantage is incomparable with Place M. What’s more, Main road runs across the center area with convenience in traffic and logistics for the market afterwards. However, the place is equally far away from the neighborhood and the suburb area and cannot attract the residents in the outskirts.
As a double-edged sword, Place M is more specifically customer-oriented. In spite of its comparably remote location with Place N, it would attract more customers in the outskirts, for they are reluctant to make a long trip for shopping. On the other hand, the train line nearby will also bring convenience in traffic to the urban-dwellers. Situated to the north-west of Place N, Place M is near the A and B Town with total population of 23 million, far outnumbering the overall population of D and E town, with 12 million.
What’s worthy of being mentioned is that fierce competition in Place N and probable monopoly i
洛基国际英语 竭诚为您服务
n Place M should also be taken into account when building the supermarket.
雅思流程图范文之《蚕丝制作》
As is displayed in the first diagram, the life cycle of the silkworm can be categorized into 4 main stages. First, the life of the silkworm starts from eggs propagated by the moth, and it takes 10 days for each egg to become a silkworm larva that feeds on mulberry leaves. Silkworm larva continues to grow in 4 to 6 weeks, then wrapping itself with silk thread to construct a cocoon in the next 3 to 8 weeks. A moth can be produced from the cocoon in 16 days. The life cycle begins again from then on.
Focusing on the second diagram, it illustrates the 5 main steps of the procedure of producing silk cloth. Well generated cocoons will be selected firstly. Before the silk thread can be unwound, cocoons have to be boiled in hot water. One cocoon can produce approximately 300 to 900 metres of silk thread. The unwound thread will be dyed afterwards to be weaved into silk cloth.
Overall, the two diagrams reveal the stage of producing cocoons in the life cycle of the
“成千上万人疯狂下载。。。。。。
更多价值连城的绝密英语学习资料，
洛基内部秘密英语，技巧，策略
请在 网上 申请报名”
洛基国际英语 竭诚为您服务
雅思流程图模板【三】:雅思写作Task1流程图考官范文(7)
雅思写作Task1流程图考官范文(7)
本文为大家收集整理了雅思写作Task1流程图考官范文。认真研读一定的雅思范文及作文模板可以帮助我们检验自己的写作水平，并能很好地吸收和应用优秀范文里的优秀内容。
The diagrams below show the life cycle of the silkworm and the stages in the production of silk cloth.
Summarise the information by selecting and reporting the main features, and make comparisons where relevant.
Sample Answer:
The given pictorials show the life cycle of the silkworm and also shows the processes of silk cloth productions.
The life cycle of a silkworm begins from the eggs laid by the mother worm and from these eggs the silkworm larva are generated after 10 days. The silkworm larva usually eats leaf like mulberry leaf and completes the second stage of the life cycle in 4-6 weeks. In their third stage, they create silk thread shells and remain there for another 3 to 8 days and then create an oval cocoons. The cocoon-stage lasts for around 16 days and they become moth in the final stage. With time the moths become grown-up and recycle the processes again. The second picture describes the processes of the silk cloth production which has more than 5 stages. In the initial stage, the silk thread shells of the silk worm are selected and
then boiled in the next stage. After boiling in water the threads are unwinded and they are usually 300 to 900 meter long. Then these are twisted and dried and finally those are
weaved to silks. The twisting, drying, weaving and then drying again process is done more than once as per necessary to produce fine quality silks.
雅思流程图模板【四】:雅思流程图范文
The illustrations below show how chocolate is produced.
Summarise the informaiton by selecting and reporting the main features.
【高分范文及深度点评】
The diagram shows the stages in the process of making chocolate.【所有的小作文第一句话都要用一般现在时。流程图必备三个词：process：整个过程, stage：阶段，step：步骤】
Chocolate comes from the cacao tree, which is grown in parts of South America, Africa and Indonesia.【开头不能冲上来就直接介绍cacao tree，而是通过主题词chocolate引出，否则显得太唐突】【流程图特点之一：介 绍过程要使用一般现在时】【流 程图特点之二：大量使用定语从句，将有关联的两句话连接。】【流程图特点之三：大量使用被动语态】The tree produces large red pods which contain white cocoa beans. Firstly,【之四：使用一些表示顺序的连接词】when the pods are ripe, they are harvested, the beans are removed and they are fermented for several days in large wooden boxes.【三个句子的并列：“句子A，句子B and 句子C”。】During the fermenting process, the beans turn brown.【要 适当地添加个别图中没有交代但能从图片中直接读出来的的
一些内容，否则可能达不到字数要求。但是一定要把握尺度，千万不要加上自己的主观观点，否则会扣 分】
Next, the brown beans are spread in the sun to dry. They are then put in large sacks and transported by train or lorry. After this, the beans are taken to a chocolate factory where they are roasted in an oven at temperatures of between 250 and 350 degree Celsius.
After being roasted, the beans are crushed and the outer shell is removed. This part is not needed for making chocolate. Finally, the inner part of the bean is pressed and liquid chocolate is produced.
【流程图特点之六：一般不需要写总结】
最后再总结一下流程图的特点：
特点一：现 在时
特点二：定语从句
特点三：被动语态
特点四：顺序词
特点五：适当添加
特点六：无总结
雅思流程图范文《砖块的制作》(含9分范文 及考官点评）
WRITING TASK 1
You should spend about 20 minutes on this task.
The diagram below shows the process by which bricks are manufactured for
the building industry.
Summarise the information by selecting and reporting the main features, and
make comparisons where relevant.
Write at least 150 words.
Brick manufacturingwww.shanpow.com_雅思流程图模板。
* Clay: type of sticky earth that is used for making bricks, pots, etc.
【满分范文】
The process by which bricks are manufactured for the building industry can be outlined in seven consecutive steps. First the raw material, clay, which was just below the surface of soil in certain clay-rich areas has to be dug up by a digger.
Then the lumps of clay are placed on a metal grid in order to break up the big chunks of clay into much smaller areas, which fall through the metal grid onto a roller, whose motion further
segregates the bits of clay. Sand and water are added to make a homogenous mixture, which is then either formed in moulds or cut into brick-shaped pieces by means of a wire cutter.
Those fresh bricks are then kept in a drying oven for at least 24 and a maximum of 48 hours, several dozens if not hundreds of bricks at a time. The dried bricks are then transferred to a so-called kiln, another type of high temperature oven. First they are kept at a moderate
temperature of 200 ℃ -1300 ℃ . This process is followed by cooling down the finished bricks for 48 to 72 hours in a cooling chamber.
Once the bricks have cooled down and have become hard, they get packaged and delivered to their final destination, be it a building site or storage.
(215 words)
【考官评语】
Band 9
This response fully satisfies the requirements of the task. All key features of each stage of the process are appropriately and accurately presented. An excellent overview is given at the beginning of the response and this skilfully incorporates part of the rubric, changing the
grammatical function, to give a brief summary of the whole process. The message is very easy to read, with seamless cohesion that attracts no attention. Paragraphing, linking and referencing are all skilfully managed. The language used is very fluent and sophisticated. A wide range of vocabulary and structures are used with full flexibility and accuracy. Only rare minor ‘slips’ can be found and these do not detract from the high rating.
雅思写作剑桥范文解析 流程图
下面是剑桥6的test 3 考到的流程图，考官给的范文。范文中有两步考官直接就写成一步，本来是3-8天和16天两个时间段，缩成了3个星期，大家写的时候可以分别写，不用写这么 精练。 考官范文：
The first diagram shows that there are four main stages in the life of the silkworm. 第一个图显示了，在蚕的生命过程中主要有四步。First of all, eggs are produced by the moth and it takes ten days for each egg to become a silkworm larva that feeds on mulberry leaves. 首先，蛾子产出卵，每个卵用10天的时间变成蚕的幼虫， 他们以桑叶为食。This stage lasts for up to six weeks until the larva produces a cocoon of silk thread around itself. 这个阶段持续最多到六个星期，直到幼虫周围生产出茧（silk
thread）. After a period of about three weeks, the adult moths eventually emerge from these cocoons and the life cycle begins again. 经过三个星期的一段时间之后，成年的蛾子最终从茧里面出来，这个生命的循环就再一次开始了。
The cocoons are the raw material used for the production of silk cloth. 茧是生产丝绸的原材料。Once selected, they are boiled in water and the thread can be separated in the unwinding stage. 一旦被挑选出来，他们在水里煮沸，丝可以在打开的阶段中被分离出来。Each thread is between 300 and 900 metres long, which means they can be twisted together, dyed and then used to produce cloth in the weaving stage. 每条丝是300到900米长，这就意味着，他们能够被缠绕在一起，染色，然后在织布阶段被用于生产布品。
Overall, the diagrams show that the cocoon stage of the silk worm can be used to produce silk cloth through a very simple process.
范文总结：
1． 163个字。
2． 使用了很多合适的关联词，见阴影部分。
3． 主要是简单的并列句。
4． 句型，搭配了一些被动语态。
5． 动词使用丰富：produce, feed on, last, emerge, select, boil, separate, unwind, twist (多数原词带入)
6． 名词比较专业：life cycle, raw material.
表述时间：
in 10 days, during the period of 10 days, The process lasts for up to 10 days. after 10 days, 10 days passed utill something happened.
表示然后：then, next, in the next state, following that, after that, the next step in the stage is ....
表示过程：process, procedure, formation, development
表示步骤：step, stage, phase
